For 4" Lumber - 11.5 x 3 Inches (3/8" Bolt Size - 6 Total) (3" Leg Width)
For 6" Lumber - 15.5 x 5 Inches (3/8" Bolt Size - 6 Total) (5" Leg Width)
For 8" Lumber - 23 x 7 Inches (1/2" Bolt Size - 8 Total) (7" Leg Width)
For 10" Lumber - 30.5 x 9 Inches (1/2" Bolt Size - 8 Total) (9" Leg Width)
More Details-
Made of 12 Gauge or 1/4" Steel
Finished with powder coat paint, with the color of your choice
Hardware sold separately. Please view our fastener section.
**Please note that you need to consult an Engineer if you want to know load calculations for your beams and ties.**
View Full Description Below for More Details.
Full Description
Soportes rectos de estilo azteca
Tallas:
Para madera de 4" - 11,5 x 3 pulgadas (tamaño de perno de 3/8" - 6 en total)
Para madera de 6" - 15,5 x 5 pulgadas (tamaño de perno de 3/8" - 6 en total)
Para madera de 8" - 23 x 7 pulgadas (tamaño de perno de 1/2" - 8 en total)
Para madera de 10" - 30,5 x 9 pulgadas (tamaño de perno de 1/2" - 8 en total)
Hermosos, resistentes y resistentes a la intemperie, estos soportes le darán un toque decorativo a cualquier proyecto. No encontrará una mejor selección de colores, variedad y formas de soportes que aquí. Lo mejor de todo es que fabricamos soportes personalizados si no encuentra exactamente lo que busca. Si necesita algo rápido, simplemente elija entre nuestra selección de soportes disponibles o solicite un soporte personalizado escribiéndonos a info@madisonironandwood.com. Estamos aquí para ayudarle a que su proyecto de vigas expuestas luzca espectacular.
Materiales : Fabricado en acero grueso de calibre 12 o 1/4" procedente de EE. UU. Pintado.con un acabado de pintura en polvo horneada súper resistente con inhibidores de rayos UV que no se desvanecerá con el tiempo como la mayoría de las otras pinturas. 11 opciones de color disponibles.
Tamaños de los agujeros-Orificios lo suficientemente grandes para pernos de 3/8" a 1/2". (Los herrajes se venden por separado -Disponible aquí )
**Tenga en cuenta que debe consultar a un ingeniero si desea conocer los cálculos de carga para sus vigas y tirantes.**
Todas las imágenes y diseños de soportes son propiedad exclusiva de Madison Iron and Wood y no podrán ser utilizados por ninguna otra empresa, persona o entidad sin permiso expreso.
Material Information
Opciones de espesor: calibre 12 o 1/4"
Nuestros soportes están hechos de acero americano y pintados con una capa de pintura en polvo. No garantizamos que nuestros soportes agreguen resistencia estructural, así que consulte con su contratista si está utilizando nuestros soportes como soporte.
Soportes rectos estilo azteca - Varios tamaños
Color:Negro mate, Tallas:Para madera de 4 pulgadas, Espesor:Calibre 12 (0,10")
We love it! It's super cute, and very well made. The only problem is I sometimes see it out of the corner of my eye and think there's a kitty watching me!
We ordered custom hangers to fit two different sizes of beams because we couldn’t find ready-made hangers in the sizes we needed. These were well-priced, arrived relatively quickly and are well-made. They look beautiful in our remodeled ceiling. We would definitely recommend Madison to anyone with similar needs. Thank you!
Very nice post caps! I used a large file to take a little wood off the edges/corners so the caps tapped on snugly with a rubber mallet & screwed them on. They really give the stairs a classy finished look!
We bought a sign for my husband's business workshop (to the right of the door in the photo) and five fencepost toppers and all of them are beautiful! The quality is great and they were as described on the site. If we can find more places to put their ironworks, we will be buying more! Really beautiful!
This is the second time I ordered from your company. Last time was tee shaped brackets. Love your products. Very high quality.
Not sure if you received the pictures I took but worked out well.
I had to improvise a little. My posts turned out to be 5 3/4". I cut a piece of 3/4" cedar to fit in the bottom of the caps. Screwed it to the top of the posts and then the caps over.
When I received them and went to install them it was an Oh S#$% moment.
Thought about ordering the six inch but there would of been a gap. Didn't think it would look good.
Wish I had more use for your products.
I'll work on it.
Thank you for a great American Company!!
Roy
So love the look. We live in western NC in a valley on a native wild water trout stream on the edge of the Pisgah National Forest. We wanted minimal interference with the natural surroundings, nautical theme, and a quality product. Check, check, check, check, plus! Thank you
Repairing an area of the deck with new posts and rails. This llama is the perfect addition to the corner post at the stairs. Totally love it. It fit perfectly on the nominal 4x4 post. Thanks
AWESOME! My husband loves dragons so I picked this design for him and he loves it! He tells me how cool he thinks it is and he’s been sharing photos to show it off. I wanted to find something he’d like and - mission accomplished. Thanks for having such a perfect design and in great quality too!
Beautiful product! We just had a new fence put in and used the decorative post caps for the gates. They look fantastic, great quality, easy to attach. The guy who built our fence was very interested in them for future projects. Highly recommend this great company!
The furniture plates we ordered from Madison are excellent, they fit perfectly and they are exactly as advertised. Our customer service experience was outstanding, And the team really helped us out because we ordered counter stools from Target that arrived missing the hardware. I would definitely order from Madison again and I would highly recommend them to anyone.
The decorative panel that you sent us is beautiful. We will definitely send you photos after we’ve installed it. And we will be ordering at least two large panels from you this next summer as we continue our project around the other side of our home.
Thanks so much.
We love the hummingbirds. It’s important to read your description well. I didnt understand how it was made to fit. It did not fit on our post but rather then shaving down the post we nailed a piece of wood to the top and fit it over that. They look great!
I’m sorry this wasn’t a close up photo, but it was hard to fit it all together without stepping back. The white anchor post caps are on each end post. The eagle post caps are on the left and right side of the light poles and of course the white post caps are in between. We are very happy with them. Thank you! They are Beautifully made! They are very nice up close. It adds a Special touch to the River. We’re Thankful for all you do. That’s a Blessing! 🍁🍂🦅