For 4" Lumber - 8 x 8 Inches (3/8" Bolt Size - 6 Total) (3" Leg Width)
For 6" Lumber - 13.5 x 13.5 Inches (3/8" Bolt Size - 10 Total) (5" Leg Width)
For 8" Lumber - 18.75 x 18.75 Inches (1/2" Bolt Size - 10 Total) (7" Leg Width)
For 10" Lumber - 24 x 24 Inches (1/2" Bolt Size - 10 Total) (9" Leg Width)
More Details-
Made of 12 Gauge or 1/4" Steel
Finished with powder coat paint, with the color of your choice
Hardware sold separately. Please view our fastener section.
**Please note that you need to consult an Engineer if you want to know load calculations for your beams and ties.**
View Full Description Below for More Details.
Full Description
Soportes para madera de 6x6" - Southwest Design
***POR FAVOR CONSULTE LA IMAGEN PARA LAS DIMENSIONES.***
- Estos soportes se utilizan tradicionalmente para postes o vigas de 6"
- El ancho de las patas es de 5" de ancho, de modo que deja aproximadamente 1/4" en los lados para tablas típicas de 5-1/2" de ancho. - Acabado con una capa de polvo horneada súper resistente a los rayos UV en una variedad de colores para que pueda combinar con su decoración. - Acero fabricado en Estados Unidos de calibre 12 con estándares ASTM estadounidenses. - Orificios lo suficientemente grandes para troncos de 1/2" - se venden por separado *Si necesita tirafondos o sujetadores, consulte nuestra selección de sujetadores.
Material Information
Opciones de espesor: calibre 12 o 1/4"
Nuestros soportes están hechos de acero americano y pintados con una capa de pintura en polvo. No garantizamos que nuestros soportes agreguen resistencia estructural, así que consulte con su contratista si está utilizando nuestros soportes como soporte.
Soportes estilo suroeste para poste de 6"
Color:Negro mate, Tallas:Para madera de 4 pulgadas, Espesor:Calibre 12 (0,10")
I really enjoy your Heron post cap. It is at our Lake of the Ozarks home that we share with dozens of native Blue Herons. Your work is excellent and installation was easy. The only thing I had to do was to shave the corners as your instructions had said to do. Proud to display to family, friends and neighbors.
We love the rooster flag. So darn cute. We had to drill a hole to use the kit. We can't get the rooster to sit up properly, we might have installed it wrong. I always need instructions. We love it any way.
I bought two heron 5 1/2 x 5 1/2 post caps and two regular caps for my dock. All are beautifully crafted. I did have to sand the corns of all four posts. I will definitely buy from this group again.
Very high quality! The only problem was that these caps were too small for my nominal 6x6 posts, by about an eighth of an inch all around. Haven’t quite figured out how I’m going to take that much wood off the posts to make these caps fit, but I will find a way, I love these caps!
Loved the caps! It was very hard to get them to fit on the 5.5x5.5 posts. Took a lot of
routering and rasping for my husband to get to fit. Would have been easier if slightly bigger. Our posts were exactly5.5 x5.5.
They are exactly what I wanted.
The whole experience was top shelf. Easy website navigation, great communication, the packaging was above and beyond and the quality of the product was excellent. You earned a repeat customer! Thank You for everything!