For 4" Lumber - 9.5" (W), Height Varies - 3" Leg Width
For 6" Lumber - 11" (W), Height Varies - 4" Leg Width
For 6" Lumber - 15.5" (W), Height Varies - 6" Leg Width
More Details-
12-gauge (1/8") or 1/4" thick steel
Finished with a thick layer of powder coat paint.
Hardware not included. Please view our fastener section.
Made in the USA
View Full Description Below for More Details.
Full Description
***POR FAVOR, VEA LA IMAGEN SOBRE CÓMO MEDIR EL ÁNGULO NECESARIO****
Esta placa para el talón es excelente no solo para ayudar a respaldar sus proyectos de madera, sino también para agregar un toque decorativo. Hecho de acero de calibre 12 o de 1/4". Para fines más estéticos, el calibre 12 está bien, si desea que sea un miembro de soporte más resistente, 1/4" sería su mejor opción. Acabado con una capa de polvo horneada súper resistente con inhibidores de rayos UV que no se desvanecerá con el tiempo como la mayoría de las otras pinturas. Nuestros soportes se fabrican bajo pedido, es por eso que podemos ofrecer una amplia variedad de opciones de colores y tamaños. Si tiene necesidades específicas de soportes, háganoslo saber y podremos ayudarle.
- Diseñado para tableros de 4" en todos los lados - Si tiene una configuración diferente, contáctenos ya que podemos hacer una para su diseño específico. - Acabado con una pintura negra mate con capa de polvo horneada, resistente a los rayos UV y súper resistente, clasificada para uso en exteriores, a menos que se elija la opción de metal desnudo. - Su elección de acero calibre 12 más liviano o acero de 1/4" - Orificios lo suficientemente grandes para troncos de 1/4" o 5/16" - se venden por separado - Si necesita un tamaño de orificio diferente, háganoslo saber y lo adaptaremos.
Si tiene un cordón inferior (viga), un cordón superior (tablero superior del techo) o un poste de soporte de diferente tamaño, háganoslo saber y podremos diseñar una placa HEEL T solo para usted.
*Todas las imágenes y diseños de soportes son propiedad exclusiva de Madison Iron and Wood y no serán utilizados por ninguna otra empresa, persona o entidad sin permiso expreso.
Material Information
Opciones de espesor: calibre 12 o 1/4"
Nuestros soportes están hechos de acero americano y pintados con una capa de pintura en polvo. No garantizamos que nuestros soportes agreguen resistencia estructural, así que consulte con su contratista si está utilizando nuestros soportes como soporte.
Soporte para talón de 4 pulgadas con pata de soporte vertical
This was a birthday present from myself in the UK to my son out there in the Seattle region. The present package was only opened yesterday and his message back to me read:-
"Love it.... it's brilliant and many thanks".
He will get the sign mounted ASAP and so the whole process will have been a total success and so I send you my thanks too.
Best regards
JTA
I have to say, I did not read the listing entirely. I did not see it took a couple weeks. I asked them, and they explained nicely. I was a bit frustrated as I thought how long to plasma cut a piece of metal. Let me tell you, when I received it, now I understand. Gorgeous piece, very high quality. Thank you very much I love it!
I installed a 14 foot custom gate that I had someone build. I added a mighty mule opener system with 5x5 .250 wall boxed tube and added the madison iron domed caps with self tapping screws to install the caps to the posts. Thank you guys!
We have lots of wild turkeys in our area so that was an obvious choice. We love them. The workmanship and quality are great, and the order was filled quickly. You were recommended by a friend and we thank her and you so much.
We love it! It's super cute, and very well made. The only problem is I sometimes see it out of the corner of my eye and think there's a kitty watching me!
We ordered custom hangers to fit two different sizes of beams because we couldn’t find ready-made hangers in the sizes we needed. These were well-priced, arrived relatively quickly and are well-made. They look beautiful in our remodeled ceiling. We would definitely recommend Madison to anyone with similar needs. Thank you!
Very nice post caps! I used a large file to take a little wood off the edges/corners so the caps tapped on snugly with a rubber mallet & screwed them on. They really give the stairs a classy finished look!
We bought a sign for my husband's business workshop (to the right of the door in the photo) and five fencepost toppers and all of them are beautiful! The quality is great and they were as described on the site. If we can find more places to put their ironworks, we will be buying more! Really beautiful!
This is the second time I ordered from your company. Last time was tee shaped brackets. Love your products. Very high quality.
Not sure if you received the pictures I took but worked out well.
I had to improvise a little. My posts turned out to be 5 3/4". I cut a piece of 3/4" cedar to fit in the bottom of the caps. Screwed it to the top of the posts and then the caps over.
When I received them and went to install them it was an Oh S#$% moment.
Thought about ordering the six inch but there would of been a gap. Didn't think it would look good.
Wish I had more use for your products.
I'll work on it.
Thank you for a great American Company!!
Roy