2" Tube Border option adds 2" to the height for code requirements
Custom sizes available. Please contact us for a quote!
*Attention - The 2" Square Tubing Border Option now only adds 2 inches to the height starting 6/24/26. If you previously ordered the 2" border option before this date, please let us know so we can match the sizes for you!*
More Details-
Finished with a zinc primer and powder coat paint to prolong the life of your panel.
Center panel is made of 12-gauge steel (~1/8" thick)
Border materials change for each selection. More info in full description.
- High Quality American made Steel - 12ga Steel finished in a super durable powder coat finish in a variety of color options.
Boarder Styles:
None - The borderless style is just the panel itself without any welded structure so that you can encase it in your wood fencing or balcony. This can be done easily by ripping a single blade cut in the center of a 2x4 board to make a wood frame or by using edging on both sides of the panel.
Tabs - This option includes 2 bent tabs on each side and 2-4 bent tabs on the top and bottom of the panel (depending on the chosen length). The tabs and the fence panel are one solid piece, no welding. This allows for a very solid panel that is easy to install at a cost affective price.
Bar- This includes a heavy duty 1/4" x 2" bar frame welded on the perimeter of the panel. The frame also has holes for screws, making installation much quicker and easier while also adding a lot of strength to the railing. Customers tend to pick this option if they want to place a wider top board for their fence to put their drinks or potted plants on. - Please be aware this will add 1/2" to the overall length and width of the panel. So, if you order a 30"x60" panel this will be 30-1/2" x 60-1-1/2" overall size
2" Square Tube- This option includes 2" square tubing welded to the top and bottom of the panel as well as 1/4"x2" flat bar welded to the side to install to the post. This makes installation simple as it does not require to have any wood framing and has a very sleek finished look. It has screw holes on the sides to screw into your post and none on the top and bottom. - Please be aware that this will add 4" to the top and bottom of your panel and 1/2" to the length. So, if you order a 30"x60" panel this option will be 34" tall x 60-1/2" wide. This option is preferred if you are planning on using our 3" metal post for a very finished, sturdy, and simplified installation.
If you would like more information on how to install, please see our installation instructions under "Installation" tab on our homepage.
If you have special sizing, installation needs, or are needing a more specific look for your fence or balcony please use the "contact us" page to send us a message and we should be able to help you with a custom order.
We offer our panels in a large variety of color options so you can get that specific look you deserve. Be aware that the glossy paints such as Red, Blue, Green, and semigloss black tend to show scuffs and scratches more than our other paint selections.
About this product- All of our products are made in America in our shop in Madison, Indiana. We strive to make the best possible products for our customers and that begins with quality materials. We source all of our materials from America to insure we have the best quality materials from the start.
Need a Custom Panel Size?
Just send us which panel you would like and what sizes you need, and we will send you a quote!
I bought two heron 5 1/2 x 5 1/2 post caps and two regular caps for my dock. All are beautifully crafted. I did have to sand the corns of all four posts. I will definitely buy from this group again.
Very high quality! The only problem was that these caps were too small for my nominal 6x6 posts, by about an eighth of an inch all around. Haven’t quite figured out how I’m going to take that much wood off the posts to make these caps fit, but I will find a way, I love these caps!
Loved the caps! It was very hard to get them to fit on the 5.5x5.5 posts. Took a lot of
routering and rasping for my husband to get to fit. Would have been easier if slightly bigger. Our posts were exactly5.5 x5.5.
They are exactly what I wanted.
The whole experience was top shelf. Easy website navigation, great communication, the packaging was above and beyond and the quality of the product was excellent. You earned a repeat customer! Thank You for everything!
We just transformed our properties appearance and value thanks to Madison Iron and Wood Triad post caps! We searched everywhere to find a post cap that matched our entrance gate. Finally found the perfect match at Madison Iron and Wood.
Shout out to Ethan and Chuck for the fantastic customer service helping us throughout the ordering and shipping process! It’s heartening to experience real customer service from people who really care.
Robert & Gail