We make a difference...
)
)
Similar Products


Are you 18 years old or older?
Sorry, the content of this store can't be seen by a younger audience. Come back when you're older.
***PLEASE SEE PICTURE ON HOW TO MEASURE YOUR ANGLE NEEDED****
This Heel plate is great for not only helping to support your wood projects, but also adding a decorative touch. Made from either 12 gauge or 1/4" steel. For more aesthetic purposes 12ga is fine, if you are wanting it to be more of a heavy duty supporting member 1/4" would be your better option. Finished in a super tough baked on powder coat finish with UV inhibitors that will not fade over time like most other paints. Our brackets are made to order, that is why we are able to offer a wide variety of colors and size options. If you have specific bracket needs let us know and we can help.
- Designed for 4" boards on all sides - If you have a different configuration, contact us as we can make one for your specific design.
- Finished in a super tough UV-resistant baked on powder coat matte black paint rated for outdoor use, unless bare metal option is chosen.
- Your choice of either lighter 12ga steel or 1/4" steel
- Holes large enough for 1/4" or 5/16" Lags - sold separately - If you need a different hole size please let us know and we can accommodate.
Top Leg Roof Pitch/Angle Available
12:12 - 45deg
11:12 - 43deg
10:12 - 40deg
9:12 - 37deg
8:12 - 34deg
7:12 - 30deg
6:12 - 27deg
5:12 - 23deg
4:12 - 18deg
If you have a different size Bottom Cord (Rafter), Top Cord (Roof top board), Or Support Post Just let us know and we can design a HEEL T plate just for you.
*All images and bracket designs are the sole property of Madison Iron and Wood and shall not be used by any other company, person, or entity without express permission.
We make our products to your order due to the variety of colors and options that we offer. It typically only takes about 1 week to make and ship your order from our shop in Madison, Indiana.
For more information on shipping, please view our 'Shipping and Returns' page.
Our brackets come in two different thicknesses, 12 gauge and 1/4 inch. They are very sturdy. They are painted with a thick layer of powder coat paint to help prevent rust!
Thickness options- 12 gauge or 1/4"
Our brackets are made from American made steel and painted with a layer of powdercoat paint. We do not guarantee that our brackets will add structural strength so please consult with your contractor if you are using our brackets for support.
Our products are proudly made in America! For more information view our 'About Us' Page!
For our coastal and lake house customers... check our or new company Exterior Plastics! Click here or go to www.exteriorplastics.com
Need some neat ideas? Or, do you want to share what you did with our products? Join 'Madison Iron and Wood Customers' on Facebook! And be on the lookout for HUGE giveaways!
We purchased the humming bird, Kokopelli, and deer. They look great! We will enjoy them for years…